Torque wrench is also called torque wrench (torque wrench, torque adjustable wrench), which is a kind of wrench. At present, manual torque wrench, electric torque wrench and pneumatic torque wrench are common in the market. Electric torque wrench is widely used in assembly lines with strict requirements for tightening process, so that the torque value of each fastener of the product is consistent, and the product quality is guaranteed.

扭矩扳手使用時發出咔嗒聲音，是提示已達到你要求的扭矩值了。

The click sound of the torque wrench indicates that the torque value you require has been reached.

扭矩扳手所發出的“咔嗒”是由本身內部的扭矩釋放結構產生的，其結構分為壓力彈簧、扭矩釋放關節、扭矩頂桿三結構所組成。在扭矩扳手上設定所需扭矩值（由彈簧套在頂桿上向扭矩釋放關節施壓），鎖定扭矩扳手，開始擰緊螺栓。當螺栓達到扭矩值（當使用扭力大于彈簧的壓力）后，會產生瞬間脫節的效應。在產生脫節效應的瞬間發出關節敲擊，扳手金屬外殼所發出的“咔嗒”聲。

The "click" of the torque wrench is generated by its internal torque release structure, which is divided into three structures: pressure spring, torque release joint and torque ejector rod. First, set the required torque value on the torque wrench (press the torque release joint by the spring sleeve on the ejector rod), lock the torque wrench and start tightening the bolts. When the bolt reaches the torque value (when the torque used is greater than the pressure of the spring), it will produce the effect of instantaneous disconnection. At the moment of disjointed effect, the joint knock and the "click" sound made by the metal shell of the wrench.

力矩就是力和距離的乘積，在緊固螺絲螺栓螺母等螺紋緊固件時，需要控制施加的力矩大小，以保證螺紋緊固且不于因力矩過大破壞螺紋，所以用扭矩扳手來操作。設定好一個需要的扭矩值上限，當施加的扭矩達到設定值時，扳手會發出“卡塔”聲響或者扳手連接處折彎一點角度，這就代表已經緊固不要再加力了。

Torque is the product of force and distance. When tightening threaded fasteners such as screws, bolts and nuts, it is necessary to control the applied torque to ensure that the threads are tightened and will not damage the threads due to excessive torque, so it is operated with a torque wrench. First, set an upper limit of the required torque value. When the applied torque reaches the set value, the wrench will make a "click" sound or bend a little angle at the wrench connection, which means that it has been tightened and no more force is added.

以上就是電動扭矩扳手http://www.hkystar.com/為大家?guī)淼南嚓P(guān)分享，感謝您的瀏覽，如想了解其他產品信息，歡迎登錄我們官網進行查看。

The above is the electric torque wrench http://www.hkystar.com/ Thank you for your browsing. If you want to know other product information, please log in to our official website.